Product Information

You are here:
Implantological products » Implant systems » Titanium implants » SKY - implants » Design

Implantological products

SKY - implants


Surgical "State of the Art"

Product information: ► blueSKY Titanium implant
Product information: ► whiteSKY Zirconium implant


Downloads


Side up

Design
Fig. 1: SKY implant system - adaptive thread
■ Bone condensation without additional working steps and instruments
■ Micro-compression of apical spongy bone
■ Additional comfort for the patient





















Design
Fig. 2: SKY implant system - Fluorescence microscopy


Quelle: Nkenke E, Kloss F, Wiltfang J, Schultze-Mosgau S, Radespiel-Troger M, Loos K, et al. Histomorphometric and fluorescence microscopic analysis of bone remodelling after installation of implants using an osteotome technique. Clin Oral Implants Res 2002;13:595-602.







Design
Fig. 3: SKY implant system - implant body

SKY combines a root-shaped implant body with a self-cutting cylindrical double thread. This way optimization of primary stability through bone condensation is achieved.









Design
Fig. 4: SKY implant system - bone condensation

The surgical protocol which is based on bone quality optimizes the primary stability.














Design
Fig. 5: SKY implant system - preparation of D3 and D4 bone

Cavities in soft D3 and D4 bone have considerably smaller dimensions.










Design
Fig. 6: SKY implant system - preparation of D2 bone

Dimensions of cavities in D2 bone are slightly larger than those in D3 and D4 bone.











Design
Fig. 7: SKY implant system - preparation of D1 bone

Especially in the cortical region, D1 bone is prepared in accordance with the implant diameter.











Design
Fig. 8: SKY implant system - double thread

Double thread for quick insertion of the implants













Design
Fig. 9: SKY implant system - torque curve

■ Very quickly in situ (in approx. 6 sec) thanks to the double thread
■ Constantly and quickly ascending curve
■ Maximum value at the end
■ No stress

Curves measured with: KaVo INTRAsurg 1000 in bovine rib bone with whiteSKY 4.0 x 12















Design
Abb. 10: SKY implant system - five lengths







Information on ordering:
» SKY implants: Ø 3,5 mm / length 10 - 16 mm
» SKY implants: Ø 4,0 mm / length 8 - 16 mm
» SKY implants: Ø 4,5 mm / length 8 - 14 mm



Side up

Surgical protocol
Fig. 1: SKY implant system, OP-Tray for SKY (titanium), blueSKY (titanium) and whiteSKY (brezirkon)
■ Instruments are clearly arranged and can be easily put in.
■ Two implant materials (titanium and brezirkon) - one surgical set of instruments
■ Decide which system to place after preparing the cavity.

Information on ordering
» OP-Tray



Surgical protocol
Fig. 2: SKY implant system, Overview - bone quality-oriented surgery

■ D4 to final drill
■ D3 to final drill
■ D2 to CF drill (cortical finisher)
■ D1 to XL drill







Surgical protocol
Fig. 3: SKY implant system, bone quality-oriented surgery - SIS drill set




Information on ordering
» Pilot drill
» Twist-Drill
» Final drill




Surgical protocol
Fig. 4: SKY implant system, bone quality-oriented surgery - D3 and D4 bone

■ Bone quality D3 (thin cortical bone, fine-meshed spongy bone)
■ Bone quality D4 (no cortical bone, fine spongy bone)








Surgical protocol
Fig. 5: SKY implant system, bone quality-oriented surgery - D2 bone

■ Bone quality D2 (dense cortical bone, coarse spongy bone)

Information on ordering
» CF drill (cortical finisher)






Surgical protocol
Fig. 6: SKY implant system, bone quality-oriented surgery - D1 bone

■ Bone quality D1 (dense cortical bone, coarse spongy bone)

Information on ordering
» XL drill (cortical finisher)






Surgical protocol
Fig. 7: SKY implant system, bone quality-oriented surgery - depth marks




The rough coronal section of » whiteSKY and » blueSKY requires a change of the surgical procedure used for SKY.



Side up

Prosthetics: impression

“ Perfect solutions for all indications ”


Fig. 1: SKY implant system - impression and model fabrication


Information on ordering
» SKY-PA20 / impression abutment incl. screw
» SKY-PA10 / impression abutment incl. screw
» SKY-IA40 / implant analog




Prosthetics: impression
Fig. 2: SKY implant system - closed impression


■ large, plane sides
■ deep ring
■ notch for guidance
→ safe transfer of the impression abutment = high precision

Information on ordering
» breciform D impression tray
» Impression materials and accessories




Prosthetics: impression
Fig. 3: SKY implant system - open impression


■ Short Torx for correction of divergent implants
■ Large retentions
■ Long screw
→ High precision

Information on ordering
» Tray material UV
» Impression materials and accessories














































































































Prosthetics: impression
Fig. 11: SKY implant system - model fabrication


■ Low shrinkage
■ Unsurpassed precision




Information on ordering
» Super hard stone Thixo-Rock



Side up

Prosthetics: single tooth restoration

“ Perfect solutions for all indications ”


Fig. 1: SKY implant system











Prosthetics: single tooth restoration
Fig. 2: SKY implant system - titanium abutments


Information on ordering
» Titanium abutments










Prosthetics: single tooth restoration
Fig. 3: SKY implant system - titanium abutments


Information on ordering
» Titanium abutments










Prosthetics: single tooth restoration
Fig. 4: SKY implant system - cast to crown base


Information on ordering
» Cast-to crown base - individual abutment










Prosthetics: single tooth restoration
Fig. 5: SKY implant system - zirconium abutments


Information on ordering
» Zirconium abutments









Prosthetics: single tooth restoration
Fig. 6: SKY implant system - UVE





Information on ordering
» UVE



Side up

Prosthetics: part. edentulous ridges and free-end sit.

“ Perfect solutions for all indications ”


Fig. 1: SKY implant system











Prosthetics: Partially edentulous ridges and free-end situations
Fig. 2: SKY implant system - titanium abutments


Information on ordering
» Titanium abutments










Prosthetics: partially edentulous ridges and free-end situations
Fig. 3: SKY implant system - cast-to crown base


Information on ordering
» Cast-to crown base - individual abutment










Prosthetics: partially edentulous ridges and free-end situations
Fig. 4: SKY implant system - zirconium abutments


Information on ordering
» Zirconium abutments










Prosthetics: partially edentulous ridges and free-end situations
Abb. 5: SKY implant system - UVE





Information on ordering
» UVE






Prosthetics: partially edentulous ridges and free-end situations
Fig. 6: SKY implant system - UVE








Information on ordering
» UVE



Side up

Prosthetics: edentulous ridge - screw connections

“ Perfect solutions for all indications ”


Fig. 1: SKY implant system - individual screw connections


Information on ordering
» Security-Lock systems



Side up

Prosthetics: edentulous ridge - fixed or removable

“ Perfect solutions for all indications ”


Fig. 1: SKY implant system










Prothetik: Zahnloser Kiefer - Fest oder abnehmbar
Abb. 2: SKY Implantatsystem - OK / UK zahnloser Kiefer

■ Steggetragene Implantatkonstruktion sowie kombinierte Teleskoparbeiten mit Deckprothesen
■ 30.06.05 Sekundärteleskope im Mund in den Modellguß eingeklebt(passiver, spannungsfreier Sitz)
■ 07.07.05 Primärteleskope zementiert und gaumenfreie Modellgußprothese eingesetzt








Prosthetics: edentulous ridge - fixed or removable
Fig. 3: SKY implant system - upper/lower edentulous ridge

■ Bar-supported implant structures and combined telescope restorations with coverdentures











Prosthetics: edentulous ridge - fixed or removable
Fig. 4: SKY implant system - upper / lower edentulous ridge

■ Bar-supported implant structures and combined telescope restorations with coverdentures










Prosthetics: edentulous ridge - fixed or removable
Fig. 5: SKY implant system - upper / lower edentulous ridge

■ Bar-supported implant structures and combined telescope restorations with coverdentures











Prosthetics: edentulous ridge - fixed or removable
Fig. 6: SKY implant system - upper / lower edentulous ridge

■ Bar-supported implant structures and combined telescope restorations with coverdentures











Prosthetics: edentulous ridge - fixed or removable
Fig. 7: SKY implant system - Smiling Cone


Gingival height of 2 mm successfully launched into the market
Gingival height of 4 mm available as of immediately


Information on ordering
» Smiling Cone




































Prosthetics: edentulous ridge - removable
Fig. 10: SKY implant system - ball head attachment


Information on ordering
» Matrices / ball heat attachments










Prosthetics: edentulous ridge - removable
Fig. 11: SKY implant system - bar abutment


Information on ordering
» Bar system / Spare screws










Side up

Efficiency of the system
Fig. 1: SKY implant system - three diameters













Efficiency of the system
Fig. 2: SKY implant system - "One for three"

■ One platform for three diameters
■ Few components - no risk of mixing up











Efficiency of the system
Fig. 3: SKY implant system - 12 positions for angled abutments with R-abutment

Distinctive feature of the R-types is an indentation in the screw canal (see Fig. 3 - right abutment).










Efficiency of the system
Fig. 4: SKY implant system - "One for three"

■ All prosthetic solutions
■ Very small number of components










Efficiency of the system
Fig. 5: SKY implant system - Torx® implant abutment connection 3.5 mm

Increased rotational stability compared to hexagon whilst offering identical manufacturing precision.