| Description |
MH Central cut with relief
- for processing of precious metals, non-precious metals, resin and ceramics
- fine removal of material, very smooth surface of object, low vibration running protects the
wrist of the technician and the drive
- relief: wider, stabler cutting edge for extended service life, enhanced cutting performance
|
GH Coarse cut with relief
- for coarse treatment of precious metals, non-precious metals, resins; in individual cases also
for treatment of plaster
- excellent removal of material, low-vibration running and extended service life due to relief
|
SH Super coarse cut with relief
- for processing of plaster and carrying out particulary coarse work on resin surfaces
- excellent removal of material and particularly smooth material surface due to relief
- no loading with shavings due to larger cut spaces
|
KF Cross cut Fine
- mainly for more delicate types of work on precious and non-precious metals, resins and ceramics
- moderate and accurate removal of material, smooth surface of object
|
KM Cross cut Medium
- for finishing of larger surfaces on precious metals, non-precious metals and resins, in individual cases also on plaster
- efficient removal of material, smooth surface of object, smooth running of tool
- universal application possibilities, therefore reduced frequency of tool exchange
|
QM Horizontal cut Medium
- suitable for finishing of larger surfaces as well as for more delicate work on precious
and non-precious metals and resin, therefore reduced frequency of tool exchange
- very fine, economic removal of material, smooth surface
- high smoothness of running protects drive and wrist
|
KG Cross cut Coarse
- for coarse and efficient pretreatment of large surfaces on precious metals, non-precious metals and resins, in individual cases also on plaster
- extensive removal of material, larger surface roughness than the finer bredent cut types
|
KS Cross cut Super coarse
- especially for processing of plaster, also suitable for very coarse types of work on resin
- extensive removal of material
- the size of the individual cut space avoids loading with shavings
|
GG Straight cut Coarse
- to perform cuts in resin or shellack plates
- very economic cutting of plates
- single, straight cutting edges
|
Previous page
